导航
Product Introduction
1. Support point-to-point protocol (PPP) BBSea NC616 series serial communication servers support PPP, PAP, and DHCP And other agreements to provide dial-in and dial-out services. Powerful processor (32bits,100M) and Large memory (8M) makes it fast and stable. 2. Unique and practical parameter setting Network port Settings: The network port of BBSea IO-Server can be set to 10/100M Response mode and manual adjustment mode. You can adjust the IO-Server based on network conditions Working mode of a network port Serial port Settings: "After reading data from the serial port, the data is packaged and sent to the network ", this process is the serial port to Ethernet communication products in the process of internal procedures will A step to be taken. You can enter the BBSea IO-Server Settings for "packaging" when The machine is set up to suit particular networks and user programs. 3. Safety function Network security is very important for console administration. BBSea IO-Server provides restrictions including MAC address restrictions, IP address restrictions, and user restrictions Including a series of safety mechanisms. The permissions include read, write, and control
Online♦ Provides 16 RS-232/422/485 serial ports
NC616 series IO-Servers provide a convenient and fast connection between serial port devices and Ethernet. The IO-Server of the same model can co-exist with RS-232 and RS-422/485 serial ports. Therefore, when two types of serial devices need to be connected to the Ethernet network, only one IO-Server is needed, which saves investment and facilitates management.
♦ Standard 19-inch rack installation
NC616 series adopts professional shell design, which can be installed and fixed on the standard 19 inch rack. The humanized layout design of the interface and indicator light, and the RJ45 connector make NC616 not only maintain the appearance after being installed on the rack, but also facilitate observation and maintenance.
♦ Unique and practical parameter Settings
Network port Settings: The network port of BBSea IO-Server can be set to 10/100M automatic adjustment mode and manual adjustment mode. You can adjust the working mode of the IO-Server network port according to the actual network condition
Serial port setting: "After reading data from the serial port, package the data to the network", this process is a step that must be experienced in the internal program operation process of serial port to Ethernet communication products. You can go to the BBSea IO-Server Settings and set the timing of "packaging" to suit particular networks and user programs.
♦ Safety Features
Network security is very important for console administration. BBSea IO-Server provides a series of security mechanisms including MAC address restriction, IP address restriction and user restriction. The permissions include read, write, and control.
♦ Network port: 10/100M mode adaptive, can also be manually set
♦ Supports the Real COM driver for Windows, allowing up to six PCS to open the same serial port of NC616 at the same time
♦ Supports TCP and UDP sockets. Each serial port supports six sessions in different session modes (TCP SERVER, TCP CLIENT, and UDP).
♦ Security mechanism: Read, write, and control permissions can be set by IP address, MAC address, and user
♦ TCP complies with RFC2217 standards and provides standardized programming interfaces
♦ Serial port terminals are connected to UNIX hosts for multi-screen switching (up to 6 screens).
♦ PPP Supports RADIUS user authentication
♦ Simultaneous PPP input, output and callback of 16 ports can be realized
♦ Supports SNMP MIB-II network management
♦ Users can set network packaging timing based on actual network conditions to better adapt to special and complex networks
attribute
NC616
processor
32bit, 100MHz
memory
8M
Network port
Speed: 10/100M adaptive, can also support manual setting.
The parameters include: 10M half duplex, 10M full duplex, 100M half duplex, 100M full duplex
Protection: 2KV electromagnetic isolation
Serial port
Ports: 16 serial ports
Form: RJ45
Serial communication parameter
Check: None, Even, Odd, Space, Mark
Data bits: 5,6,7,8
Stop bits: 1,1.5, 2
Flow control: RTS/CTS, Xon/Xoff
Speed: 50~460800bps
Software characteristics
Protocol: DHCP, TELNET, TCP, UDP, IP, ICMP, ARP, SNMP, PPP
Real COM driver: Windows NT/2000/XP/2003 COM driver
Fixed tty: Fixed TTY driver for SCO UNIX and Linux
collocation
TELNET, Console, and WEB: Chinese menu and English menu (optional)
Network management function
SNMP MIB-II
Power demand
NC616:176 ~264VAC, 47 to 63 Hz
NC616-220V: 176~264VDC
NC616-110V: 100V to 240VDC
Nc616-48 V: 36V to 60VDC
NC616-24V: 18V~36VD
Mechanical specification
Material: metal shell
Weight: 2.8 kg
Working environment
Operating temperature: -20~85℃
Operating humidity: 5~95%
Storage temperature: -20~85℃
Storage humidity: 5~95%
Pass the certification
CE, FCC
Model number
specification
NC616
One 10M/100M network port, 16 port RS-232 serial port communication server, 15 kVESD protection, standard 1U high 19 inches rack
NC616-8M
One 10M/100M network port, eight RS-232 and eight RS422/485 serial communication servers, 15KVESD protection, standard 1U high 19 inches rack
NC616-16M
One 10M/100M network port, 16 RS422/485 serial communication servers, 15KVESD protection, standard 1U high 19 inches rack
Note: 1. Power supply: AC220V, DC24V/48V/110V/220V
2. Serial port: RJ45
3. Cpl-rj45m9 :RJ45 to DB9-pin cable
Cpl-rj45f9 :RJ45 to DB9 cable
Cpl-rj45m25 :RJ45 to DB25-pin cable
Cpl-rj45f25 :RJ45 to DB25 cable
The above products include equipment, installation CD, certificate of qualification
认证邮箱信息
Product color page
Installation manual
Product line sequence
O